Call
706.776.7210
to
put
the 'freeze'
on your
Energy Hog!
|
|
What is
Compress Shield? |
Compress
Shield is a distinctive refrigeration system oil
treatment formula created to guard against the costly
loss of cooling capacity. Independent research shows
that lubricant build-up on your refrigeration system’s
internal surfaces can degrade its performance by up to
30%. This prevents it from transferring heat, which
increases pressure drops, elevates boiling points and
reduces its latent heat capacity.
Compress Shield’s ability to increase the
heat transfer process through
metallurgical thermodynamics and metal-surface chemistry
helps you maintain the
peak performance that’s key to minimizing your long-term
operating costs. |
|
How The
Magnetic Molecule Functions Breaks Up Stagnant
Refrigeration Oil In The Condenser And Evaporator
Restoring The Systems Ability To Transfer Heat
|
 |
|
We first
see the initial oil build up on the tubing wall.
Compress Shield is applied and cleans the tubing walls.
After walls are cleaned, they are protected and heat
transfer is improved. Equipment is more quiet, efficient
and cost effective. |
Compress Shield and oil are 1500% stronger than the oil
alone.
When your refrigeration system is turned off or
cycles off, oil drains from the compressor’s metal
surfaces, breaking the boundary film -– the layer of oil
between its moving parts.
Thanks to Compress Shield’s patented polar bond, the
boundary film remains on the surface and protects the
metal, even when the oil layer is not fully established.
So when the layer reforms, the combination of Compress
Shield and the oil is 1500% stronger than the oil alone.
This reduces your system’s operating load by
increasing the heat transfer process, which cuts wear
and tear while extending the life of your equipment.
Once introduced, Compress Shield remains in a liquid
state as it migrates throughout the system. Its
molecules displace the insulative layer of nonconductive
oil and permanently bond to all system surfaces. This results
in significantly improved heat transfer rates through
electromagnetic heat propagation.
Compress Shield will not bond to itself and will not
permit the oil to reattach to metal
surfaces. What Compress Shield will do is increase your
equipment’s volumetric
efficiency, oxidation resistance and operating life,
while reducing its laminar flow and
run time. You’ll enjoy quieter
operation, enhanced compressor seal
protection, average energy savings of 12.3%, and system
lubrication that’s 1500%
stronger than whatever you’re using now.
Compress Shield’s unique formulation is guaranteed to
reduce your costs.
 What
distinguishes Compress Shield from other refrigerant oil
additives is its ability to
do more than just increase the lubricity of
refrigerant oil and reduce wear on
compressor parts.
Its unique formulation improves the overall operating
efficiency of heat exchangers in air conditioners,
chillers and refrigeration systems. |
|
Benefits of Compress Shield
Include: |
 |
Restored
Volumetric Capacity:
The addition of a stabilized layer on
all moving parts
improves the seals made between moving parts and reduces
the amount of “blow-by” — volume lost during compression
through bad seals. |
|
|
Reduced
Run Time and Head Pressure:
By improving the heat transfer rate of the
evaporator and condenser, the system
capacity is effectively increased. With
improved heat transfer capacity, compressors that
cycle don’t need to run as long to produce the same
amount of heat transfer. This resulting in energy savings. |
|
|
Decreases
Amperage:
An appreciable drop in amperage |
Increase
your energy efficiency
and save up to
30% on utility bills with
|
|
|
Reduced
Mechanical Friction:
By coating the metal surfaces of moving parts
in the compressor, mechanical friction between the parts
is reduced. Improved lubricity reduces corresponding
wear on parts and excess heat generated, extends drip
down time, reduces valve noise, maintains seal
pliability and reduces oil foaming. |
|
|
Extended
Equipment Life:
Reduced mechanical friction, wear on moving parts and excess heat generated all serve to extend the life of
equipment. |
|
|
Reduces
Maintenance Costs:
These
costs are reduced through the added lubricity
and
protection afforded by the polarized molecule. During
the off cycle, or if there is a loss of oil and/or oil
pressure, or refrigerant flooding, the polarized
molecule remains on the bearings, rods, pistons, etc. |
|
|
Quieter
Operation:
Field experience has shown that PRT treatment often
produces a smoother and quieter running system. |
|
|
Lowers
Demand:
In office buildings, schools, and homes, demand charges
by utilities are set by the air conditioning and
refrigeration equipment because it is the largest equipment on the premises. This can be very significant. |
|
|
Has
No Halogen Atoms or Compounds:
Does not contribute to the forming of acids. |
|
|
Compatible
with all refrigerants and non-silicon compressor oils. |
|
|
Compress
Shield Technical Reports |
Please
click on the links below to open .pdf files for more information.
A&
J Energy Audit
Federal
Technology Alerts - Polarized Refrigerant Oil Additive
Universal Studios
Report
Compress
Shield Lab Test
Compress
Material Safety Data Sheet
Compress
Shield White Paper
|
|
|
Contact WR Cool Energy Savings LLC, your authorized
Georgia Compress Shield distributor, at 706.776.7210 to
save up to 30% on your utility bills.
We
can provide references, installation and testing procedures,
laboratory reports, chemical and technical product
discussions, savings, verification techniques and
manufacturer’s warranty details.
We guarantee a 5% cost savings on all installations
performed in accordance with the manufacturer’s
installation instructions. Ask for details of this
guarantee and your cost savings (return on investment is
normally captured 13-18 months after installation). |
|
Thank you for visiting WR Cool Energy Savings, LLC
Website
Want to start saving a lot of money on equipment and
energy costs?
Call 706.776.7210 or send an
email
for more information. |
|
